Council Tool 5 lbs. Fallers SB Axe; 28 in. Straight Wooden Handle, Pack of 6
5 lbs. Dayton pattern single bit axe with a 28 straight wooden handle.
5 lbs. Fallers single bit axe with a 28 in. straight wooden handle. A mid-sized felling axe for general axe chores including driving wedges. Cutting edge is approximately 5″ of overall length and the poll is square. Newly designed head has a larger poll, balanced head and wedge shaped balde with chamferred poll.
Forged tool steel head. Made in USA.
5 lbs. head weight.
4 ¾” Bit length from toe-to-heel.
7 3/8” Overall head length from bit-to-poll.
Longer poll for balance, and a larger surface area, including chamfered poll corners, so that it does not cause excessive damage while driving HDPE plastic felling wedges.
Balanced head from front to back, with the center of mass within the eye, which reduces head-roll/blade-drop.
Convex bevels/bit. Doubles as a decent splitting axe, using a wedge-shaped blade, with a high centerline, to help keep the axe head from sticking while splitting.
ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
Head coated with red enamel and cutting edge in clear lacquer to deter rust.
28 in. straight American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite size and the aluminum choice of material is strong, lightweight and does not change size with moisture content.
Approximately 1/2 in. of overall length of the handle is removed during assembly.
